The upgrade consists in the whole substitution of the rubber wheel of the cardboard store. This is part of a series of new solutions studied by SMI in order to upgrade to the latest version all the machines already installed on site.
OLD VERSION the wheels were pushed onto the cardboard by a spring and were fixed with a lever (green part in picture no.1). This device required manual adjustments for each wheel during every format change or after a jam, which caused waste of time; moreover, there was the risk of different regulations depending on the different skills of each operator, which might affect the machine performance.
UPGRADE The new device has been implemented with a pneumatic circuit that moves the rubber wheels up and down by means of air pistons (in the green square, picture no.2), thus avoiding human errors. The cylinder also ensures an homogeneous pressure and a correct advancement of the blank, because the traction is the same on all cardboard sides. The elimination of the compression spring in favour of a cylinder also ensures more stability for the system and prevents frequent maintenance interventions to replace this element that is constantly worn, due to the constant stress to which it is subject.
Another important innovation introduced by this retrofitting consists in the motorization of all wheels which pick up the cardboard, ensuring maximum friction and a constant supply to the blank climb and preventing any kind of lock. The transmission is derived from the blank climb by means of a belt system (green part, picture no.3), thus avoiding the use of additional motors and therefore the increase of energy consumption.
The mechanical parts will be supplied together with a new POSYC(HMI) and a new MARTS (PLC), equipped with a new software interface revised both in the graphics layout and in some process routines.
It is recommended to integrate this upgrade with the ZF010023, if not already present on the machine, in order to optimize the intervention time for assembling the new solutions.
If not specified, this offer does not include installation and commissioning of the group. Machine database to be supplied, in order to allow the software upgrade without losing format customization.
Minimum requirements: The feasibility of the upgrade has to be checked by SMI technical department.
- Improvement of the cardboard feeding; - Smooth picking of the blank; - Easy change-over; - Quicker restart in case of cardboard jam; - Top efficiency for the entire life of the components.
The European Regulation 679/2016 (GDPR) on the protection of personal data has been fully applicable since May 25th, 2018. This is an important goal, because it lays down rules relating to the processing of personal data for all Countries within the Union. Every company of the SMI Group planned a series of activities, assets or operational modes to comply with the regulation and put into practice the protection of personal data. Here is a list of actions taken to comply with the European Regulation and our policy on personal data processing.
Lawfulness of processing All activities relating to personal data processing shall be lawful (consent, contract obligations, vital interests of the data subject or of third parties, compliance with legal obligations to which the controller is subject, public interest or exercise of official authority, legitimate interest pursued by the controller or by third parties).
Information document The information statement has been improved and updated to the new regulations (art. 13 and 14 GDPR).
Rights of the data subjects (right of access, right to erasure-right to be forgotten, right to restriction of processing, right to object, right to data portability) Technical and organization measures have been adopted to ensure the data subject's exercise of his rights and to meet the data subject requirements.
Controllers, processors Based on the new principle of “accountability”, SMI Group organization was re-defined, in order to proactively ensure integral compliance with the Regulation. Redefinition of the role of data processors and service suppliers whose activity implies personal data processing.
Risk of data processing; accountability measures taken by controllers and processors (Impact assessment, record of processing activities, security of processing, data breach) The “Conformity document”, including records of data processing activity, plans, adopts and demonstrates all technical and organizational measures taken to adequately perform the data processing activities and specifies the necessary procedures to be adopted to notify data breach.
Transfer of personal data to international organizations Smi Group adheres to the general principles and guarantees concerning the transfer of personal data to third Countries.
The Controller is: SMI S.p.A. Head office: Via Carlo Ceresa, 10 - 24015 San Giovanni Bianco (BG) - ITALIA VAT nr: IT03942700166 - R.E.A. 421708 For further information, write to: firstname.lastname@example.org
According to the European Regulation 679/2016, the data subject is entitled to exercise the rights set forth in the Regulation. The integral version of art. 15; 16; 17; 18; 20; 21; 77 of the European Regulation is attached to this document.
SMI S.p.A. Sede amministrativa: Via Carlo Ceresa, 10 - 24015 San Giovanni Bianco (BG) - ITALIA Sede legale: Via Monte Grappa, 7 - 24121 Bergamo (BG) - ITALIA C.F. e P. IVA IT03942700166 - R.E.A. 421708 Capitale Sociale Euro 5.000.000 i.v.