Resulting from an innovative project characterized by the use of technologically advanced solutions inspired by Industry 4.0 and Internet of Things (IoT), the ECOBLOC® ERGON K series developed by SMI is composed by ultra-compact “combi” plants for the stretch-blow moulding, filling and capping of PET containers up to 3 L.
The ECOBLOC® K systems offer all the advantages of the rotary technology, even for production requirements from 1.000up to 8.800 bottles/hour usually served by linear stretch-blow moulders, and are devoted to bottling lines for still water and milk (EV models) and edible oil (EM models).
The preform heating section is integrated to the stretch-blow moulding section in a single module.
An innovative and unique solution enabling to install the plant even in small bottling lines.
The stretch-blow moulding carousel is equipped with motorized stretch rods, controlled by electronic servo-drives, which do not require mechanical cams. This solution ensures: precise control of the stretch rod path, considerable energy savings and reduced mechanical intervention.
The stretch-blow moulding system is equipped with high-performance, low-dead volume valves which permit to reduce the pre-blowing and blowing times, thereby improving the machine efficiency and the quality of the bottles manufactured.
The filling technology makes use of high-efficiency valves controlled by flux-meters. Thanks to the electronic control of the operations, the filling process is carried out precisely and quickly. The ECOBLOC® K is also equipped with a capper for the application of screw or pressure caps.
ECOBLOC® K , the most compact combi in the world, boasts:
overall dimensions reduced to a minimum;
easier management and control of the production cycle;
high technological content of the solutions inspired by Industry 4.0 and Internet of Things (IoT);
electronic installation with transmission systems through brushless motors with an integrated digital servo-drive;
low maintenance and operating costs;
excellent quality/price ratio: the “combi” solution does not require the rinser, the conveyors between the stretch-blow moulder and the filler and the accumulation conveyors;
The European Regulation 679/2016 (GDPR) on the protection of personal data has been fully applicable since May 25th, 2018. This is an important goal, because it lays down rules relating to the processing of personal data for all Countries within the Union. Every company of the SMI Group planned a series of activities, assets or operational modes to comply with the regulation and put into practice the protection of personal data. Here is a list of actions taken to comply with the European Regulation and our policy on personal data processing.
Lawfulness of processing All activities relating to personal data processing shall be lawful (consent, contract obligations, vital interests of the data subject or of third parties, compliance with legal obligations to which the controller is subject, public interest or exercise of official authority, legitimate interest pursued by the controller or by third parties).
Information document The information statement has been improved and updated to the new regulations (art. 13 and 14 GDPR).
Rights of the data subjects (right of access, right to erasure-right to be forgotten, right to restriction of processing, right to object, right to data portability) Technical and organization measures have been adopted to ensure the data subject's exercise of his rights and to meet the data subject requirements.
Controllers, processors Based on the new principle of “accountability”, SMI Group organization was re-defined, in order to proactively ensure integral compliance with the Regulation. Redefinition of the role of data processors and service suppliers whose activity implies personal data processing.
Risk of data processing; accountability measures taken by controllers and processors (Impact assessment, record of processing activities, security of processing, data breach) The “Conformity document”, including records of data processing activity, plans, adopts and demonstrates all technical and organizational measures taken to adequately perform the data processing activities and specifies the necessary procedures to be adopted to notify data breach.
Transfer of personal data to international organizations Smi Group adheres to the general principles and guarantees concerning the transfer of personal data to third Countries.
The Controller is: SMI S.p.A. Head office: Via Carlo Ceresa, 10 - 24015 San Giovanni Bianco (BG) - ITALIA VAT nr: IT03942700166 - R.E.A. 421708 For further information, write to: email@example.com
According to the European Regulation 679/2016, the data subject is entitled to exercise the rights set forth in the Regulation. The integral version of art. 15; 16; 17; 18; 20; 21; 77 of the European Regulation is attached to this document.
SMI S.p.A. Sede amministrativa: Via Carlo Ceresa, 10 - 24015 San Giovanni Bianco (BG) - ITALIA Sede legale: Via Monte Grappa, 7 - 24121 Bergamo (BG) - ITALIA C.F. e P. IVA IT03942700166 - R.E.A. 421708 Capitale Sociale Euro 5.000.000 i.v.